①汽車無法行駛

① The car cannot be driven

不管是在R擋還是D擋，汽車還是不能行駛的話，很可能是因為自動變速箱出現漏油的情況了。這時候就需要看一下車底，是否有紅色的油液漏出來，如果有的話就說明變速箱漏油了。

Whether in R or D gear, if the car still cannot drive, it is likely due to oil leakage from the automatic transmission. At this point, it is necessary to check the bottom of the car to see if there is any red oil leakage. If there is, it indicates that the transmission is leaking oil.

處理方法

processing method

如果是密封圈出現老化的話，只要將其更換就可以了。那如果是箱體接合面處出現損壞的話，我們適當加厚紙墊進行修補，但對于嚴重滲油的情況，就需要用到焊補的方式了。

If the sealing ring is aging, just replace it. If there is damage to the joint surface of the box, we can add thicker paper pads for repair. However, for severe oil leakage, welding repair is necessary.

自動變速箱常見故障及處理方法

Common faults and handling methods of automatic transmission

②汽車升擋異常

② Abnormal upshifting of the car

如果感覺升擋前的轉速明顯比以前高（ECO模式/Normal模式），甚至連升擋也不可以的話，很可能是因為節氣門拉索或節氣門位置傳感器不當，其次，也可能是因為車速傳感器存在故障。

If you feel that the speed before upshifting is significantly higher than before (ECO mode/Normal mode), and even upshifting is not possible, it is likely due to improper throttle cable or throttle position sensor. Secondly, it may also be due to a malfunction in the speed sensor.

處理方法

processing method

首先我們需要排查一下出現異常的原因，如果是因為位置傳感器不當的話，就需要我們重新調整位置了。那如果是因為車速傳感器存在故障的話，這時候就得更換一個新的上去。

Firstly, we need to investigate the cause of the abnormality. If it is due to improper position sensors, we will need to readjust the position. If it is due to a malfunction in the speed sensor, then it needs to be replaced with a new one.

自動變速箱常見故障及處理方法

Common faults and handling methods of automatic transmission

③發動機空轉

③ Engine idling

通常來講，發動機空轉是分為兩種情況的，一種是變速箱瞬間從高擋位降到低擋位，這類情況很可能是因為控制系統或者散熱系統出現異常了。而另一種情況，則是（加速或換擋時）出現短暫的打滑空轉現象，但出現這個情況的原因，很可能是出在變速箱本身。

Generally speaking, engine idling can be divided into two situations. One is when the gearbox suddenly drops from high gear to low gear, which is likely due to abnormal control or cooling systems. Another scenario is a brief slipping and idling during acceleration or gear shifting, but the reason for this may be due to the transmission itself.

處理方法

processing method

這時候單靠自己是很難解決的，因為檢查汽車控制系統或者散熱系統，本來就是一個大工程。那如果是第二類情況的話就更不用說，整個修復過程是需要將變速箱解體檢查的。要知道自動變速箱是一個非常復雜的部件，先別說怎么去檢查問題，單是拆裝整個過程就已經非常考驗技術了。所以，如果是發動機出現空轉的話，好還是交給專業人員處理吧。

It is difficult to solve this problem alone at this time, because checking the car control system or cooling system is already a big project. If it is the second type of situation, let alone the fact that the entire repair process requires disassembling and inspecting the gearbox. You should know that an automatic transmission is a very complex component. Not to mention how to check the problem, the entire process of disassembly and assembly is already a very technical test. So, if the engine is idling, it's better to hand it over to a professional for handling.

本文由濟南自動變速箱維修友情奉獻.更多有關的知識請擊:http://www.5918bqq.cn我們將用真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

This article is dedicated to the maintenance of automatic transmissions in Jinan. For more related knowledge, please click: http://www.5918bqq.cn We will provide you with comprehensive service with a sincere attitude. We will gradually contribute more relevant knowledge to everyone. Stay tuned